SugarCRM SupportProduct GuidesSugar Versions12.0 Sugar12.0 Sugar SellSugar Sell 12.0 Administration GuideSugar Maps Administration

Sugar Maps Administration

Overview

With Sugar Maps, our integration with Microsoft Bing Maps, users can quickly see which records are in close proximity to each other, plot records on a content-rich map, and generate driving directions between records. This guide walks through the steps to configure Sugar Maps. For information on using Sugar Maps once it has been installed, please refer to the Sugar Maps User Guide.

Note: If you have Sugar Sell Premier, Sugar Maps powers the geo-mapping capability. Sugar Maps is automatically enabled and you do not need a separate license key for Sugar Maps.

Prerequisites

  • Sugar Maps is included with Sugar Sell Premier 12.0 and powers the geo-mapping capability. Sugar Maps can also be purchased as an add-on for Sugar Sell Advanced, Enterprise, and Serve. Sugar Maps can be purchased by contacting your Sugar partner or representative. 
  • You must be a System Administrator to complete the configuration on this page.

Configuring Sugar Maps

Once Sugar Maps is enabled in your instance a System Administrator will need to perform a series of configuration steps to control the behavior and visibility of Sugar Maps. These steps include creating schedulers, enabling and configuring modules, configuring the subpanel, setting measurement units, and disabling Sugar Maps.  

Creating Sugar Maps Schedulers

For records to be displayed in Sugar Maps, you will first need to set up the Geocoder Maps and Geocoder Resolver schedulers. The Records Geocoder sends the records to the geocoding server in batches of 1000, and the Geocode Resolver polls the server for the geocoded results and imports the information into Sugar. Geocoding generates the latitude and longitude of a record's address, which then allows Sugar Maps to map the record.

Note: The Sugar Maps schedulers must be created by a System Administrator that is assigned a Sugar Maps license. 

Use the following steps to set up your schedulers:

  1. Navigate to Admin > Scheduler.
  2. Open the Actions menu in the Sugar Scheduler tab and select "Create Scheduler".
    create scheduler
  3. Set the Job Name field to "Geocoder Maps".
  4. Set the Job field to "Geocoder Maps".
  5. We recommend setting the Sugar Maps schedulers to run 30 minutes apart from one another, with the Geocoder Maps scheduler running first. To achieve this, check the Advanced Options checkbox field to reveal the additional interval settings. Then set the interval to 0 min for the Geocoder Maps scheduler. Under Advanced Options, set the Date and Time Start to a future date and time starting at the top of an hour.
    schgmaps
  6. Click the Save button to create the scheduler.
  7. Repeat steps 1-6 to create the Geocoder Resolver scheduler. The Geocoder Resolver scheduler should be set at 30 min intervals, with the Date and Time Start set a half-hour after the Geocoder Maps scheduler start date and time. 
    grsch

Refer to the Schedulers documentation for complete steps to create a custom scheduler.

Enabling and Configuring Modules for Sugar Maps

Sugar Maps can be enabled for a range of modules. To enable a module, you will need to add the module in your Maps Configuration settings and map the module's fields or a related module's fields for geocoding.

Use the following steps to enable a module for Sugar Maps:

  1. Navigate to Admin > Maps.
  2. From the Maps Configuration page, select the module you want to add from the Add a new module for geocoding dropdown.
    Sugar Maps config mod select
  3. Click the pencil icon to access the module's mapping settings for geocoding.
    mapsconfigmapping
  4. From the mappings page, use the Mapping Type dropdown to select if you would like to configure your field mappings to the selected module's fields or to a related record.
    Note: When mapping to a related record, the field mappings used for geocoding will be the mappings configuration of the related record. For example, if you chose to map opportunities to related account records, the field mappings set for the account configuration would be used for opportunities record geocoding.
  5. When mapping to the selected module's fields, use the dropdowns to map each address field to the module field that matches the address value you want to use for geocoding.
    sugarmapsfeilds
  6. Click the Save button.    

Configuring the Maps Subpanel

Once a module is enabled for Sugar Maps, the Maps subpanel is automatically added to the module's record view. From your Maps Configuration settings, you can edit the columns displayed when viewing records from a specific module type within the Maps subpanel.

Use the following steps to configure the columns shown in a Maps subpanel:

  1. Navigate to Admin > Maps.
  2. Click the subpanel icon for an enabled module.
    smapssubpanelnav
  3. Click the plus icon to add a column.
  4. Use the dropdown to select the column field.
    subpanelsmaps1
  5. To remove columns, click the x icon. If you need to reset the subpanel configuration to the default settings click the refresh icon.
    smapsrsub
  6. Click the Save button.

Setting the Measurement Unit for Driving Directions

You can choose to display driving direction distances in kilometers or miles.

Use the following steps to set the default measurement unit used for driving directions:

  1. Navigate to Admin > Maps.
  2. Select the default measurement unit from the Measurement Unit dropdown field.
    smconmu
  3. Click the Save button.

Last modified: 2022-11-07 18:52:26